Manual Vacuum-Lifter
Seite 4 von 7
-
Protect the unit or the machine from the weather, such as rain water, sunlight, moisture,
etc.!
-
Ensure the separation of the various materials in the disposal that they can be fed into the
recycling loop!
The vacuum lifter T has been manufactured in accordance with the general provisions in mechanical
engineering.
The security system consists of:
•
A pressure gauge for continuous monitoring of the vacuum during the lifting process
•
The audible alarm sounds when the hazard warning device when the required vacuum is reached.
The nameplate provides information about the origin,
identity and year of manufacture and, if necessary,
on the maximum load capacity.
Please compare with tradition, the nameplate with
the details on the first page of the manual. If different
data, please contact us immediately with the dealer
or the manufacturer.
Please read the information in the Installation chapter carefully and follow the instructions
meticulously. Any damage caused by non-observance are excluded from the liability of the
manufacturer or the WEHA-Ludwig Werwein GmbH.
Check the shipment, any damage to the shipping container. Report damage during transport
immediately to the carrier and the company WEHA!
Any defects caused by faulty installation and use are excluded from the warranty by the dealer or
manufacturer!
Normally you will the vacuum lifter T packaged with cardboard delivered.
Check before starting with unpacking the accompanying delivery note with the items delivered!
Remove the transport packaging:
• Remove the
tape or straps and grab the contents gently from!
•
Exercise caution when unpacking the vacuum lifter T before, so as not to damage them!
•
Serving the components of the vacuum lifter T on sharp edges can damage the surface protection
and other components!
• Dispose of the
packaging waste in accordance with local guidelines and lead them back into the
material cycle to!
