Manual Vacuum-Lifter
Seite 7 von 7
This inspection must be performed at least once a year.
•
Check the vacuum lifter T annually rusty bodies, in particular all welds.
•
Remove the rust and protect this site by applying a suitable rust inhibitor, z. B. Zinc spray.
•
Check all fittings of the vacuum lifter T for looseness and tighten the screw if necessary.
•
Check the rubber seal lip damage and can replace it if necessary, by the dealer or manufacturer.
Repairs and welds (poisoning!) Must be performed only by persons who have the necessary
knowledge and skills for this!
