Wega Wegaconcept, Руководство по эксплуатации и обслуживанию

Страница: 55 / 76

55
Wegaconcept
Technical manual
ENGLISH
k1 k2 k3 k4 k5 k6 kC
Key - value correspondence on the display
i
Setting the "GRINDERS WEAR" threshold to 0, the
system will not perform any reporting.
i
By setting one or more dose-keys to 0, those keys
will not be counted.
!
The system operates only if the machine is paired
with a single grinder.
Press ( ) to view the key-dose grammage screen.
k1 gr.00 k4 gr.00
k2 gr.00 k5 gr.00
k3 gr.00 k6 gr.00
kC gr.00
ENTER
Press the ENTER key, the value referred to the "k1" key
will flash.
Enter the amount in grams of ground coffee per pro-
grammed dose using the key
( ) or ( ) .
The available range is: 0 ÷ 22 g.
k1 gr.00 k4 gr.00
k2 gr.00 k5 gr.00
k3 gr.00 k6 gr.00
kC gr.00
ENTER
Confirm by pressing ENTER, the system will switch to
the next data. Repeat the previous step until all the
dose keys are set.
Once you set the limit threshold in kg of coffee, you
must set each beverage key and assign the correct
weight of ground coffee used to it.
After completing this operation, during in the use, the
count will be increased by the dose set for each drink,
with every coffee delivery.
Setting example:
K1 gr.07 (Single espresso) K4 gr.14 (Double medium)
K2 gr.14 (Double espresso) K5 gr.07 (Single long)
K3 gr.07 (Single medium) K6 gr.14 (Double long)
kC gr.07 (Continuous)
Upon reaching the amount of kg set as the threshold,
the system will show a message on the display (bottom
row), reminding the user to carry out the replacement
of the grinding of the coffee grinder-doser.
Display the screen below.
WEAR ABD BLADES
kg XXXX/YYYY
Press the key ( ) .
RESET ALARMS
PRESS KEY ^ 3 SEC
confirm by pressing ( ) for 3 seconds.
Reset
To reset the used kg counter proceed as follows: