Wega Wegaconcept, Руководство по эксплуатации и обслуживанию

Страница: 21 / 76

21
Wegaconcept
Technical manual
ENGLISH
17.3 Programming the hot water doses
To p r o g r a m m e t h e
hot water key, proceed as
follows:
t place the cup under the
hot water nozzle (
13 );
t press and hold down
the "
PROG/STOP
" key
on the left push-button
panel until all dose key
LEDs are switched on;
t press the hot water de-
livery key
;
t when the desired dose has been reached, confirm by
pressing the hot water key
again.
t upon completion of the programming, press the
“
PROG/STOP
” key .
12
17
Preparation of beverages
17.1 Programming the coffee doses
To program the dose keys, proceed as follows:
t
press and hold the “
PROG/STOP
” key down for 5
seconds: the “
PROG/STOP
” key will flash and all keys
on the push-button panel being programmed will
turn on;
t fill the filter with a dose of ground coffee and press it
with the coffee press;
t
attach the filter holder to the delivery group;
t put the coffee cup under the dispensing spout ( 16 );
t press the desired dose
key (e.g.: “
1 Espresso”
);
t
all the leds will turn off,
except for the dose key
being programmed, and
the one on the “
PROG/
STOP
” key;
t
wait for dispensing; to
confirm the dose press the dose key or the "
PROG/
STOP
" key again;
t
repeat this operation for the other dose buttons;
t
upon completion of the programming, press the
“
PROG/STOP
” key to exit dose programming.
16
17.2 Coffee preparation
t Fill the filter with a dose of ground coffee and press
it with the coffee press;
t attach the filter holder to the delivery group;
t put the coffee cup under the dispensing spout;
t press the desired dose key (e.g.: “ 1 Espresso” )
and wait for coffee to be delivered (the LED of the
selected key will go out).
t
to stop delivery of coffee in advance, press the deliv-
ery key again or press the “
PROG/STOP
” key.
i
After 30 seconds of idle time, the machine will exit
from the dose programming mode.
i
The programming of each dose must be carried
out with ground coffee and not with previously
used grounds.
!
It is possible to program all machine's push-button
panels simultaneously using only the left push-
button panel. To obtain different doses for the
various groups, perform the programming with
the left push-button panel first, and then with all
the others.
i
All models are provided with 2 keys for the delivery
of hot water. These can be programmed individually
and supply doses which are independent from one
another.
i
The 4GR version has 2 hot water nozzles. The left key
controls the left hot water nozzle, while the right key
controls the right hot water nozzle.