WECO 5K3-XP-EMEA
2
ATTENTION
THIS MANUAL MUST BE READ ENTIRELY EVEN IF YOU USE THE 5K3XP AS HIGH
VOLTAGE YOU MUST READ ALSO THE LOW VOLTAGE SECTION
ATTENTION:
The battery could explode and/or be severely damaged if dropped or
Crushed. Never install the battery if the battery appears damaged.
ATTENTION:
Appropriate mechanical lifting equipment must be used since
the Battery Module weighs 126.3Lbs / 57.3 kg
ATTENTION:
The battery may explode or catch fire if exposed to open
flames or other extreme sources of heat.
ATTENTION:
The battery terminals must be disconnected before
commencing any work on the battery.
ATTENTION:
This battery can accumulate parasite current. Do not touch
the B+ and B- terminals. Always check the B+ and B- terminals with a
voltmeter.
Always ensure that there are ZERO volts present on the terminals before
performing any operation on the battery, the HV FAST terminals must
have their rubber protection in place all the time, remove them only
when ready to connect the HV cable.
ATTENTION:
Always wear Individual protection devices, use insulated tools,
and follow the safety plan of this manual.
At end of life, these batteries must be disposed of properly by a certified
professional company.
Do not open the battery cover for any reason.
Opening the battery is a prohibited and potentially dangerous operation.
Do not short the battery terminals as this may cause fire or explosion.
Do not use charging devices, cables, connectors, fuses, switches not approved by WeCo.
The battery and its connections such as cables, switches, fuses, bus bars etc. they must be inspected,
cleaned, tightened every three months or whenever necessary also in consideration of the
environmental conditions and or stress of use of the system
Check the insulation resistance of the connections every 3 months. Cables and insulators can have an
early reduction of their insulation coefficient if exposed to environmental conditions or excessive use
stress.WeCo declines all responsibility for illegal actions on the battery.