MPEG4 NETWORK IP CAMERA User’s Guide
22
TFTP Server IP
is the address to which Mpeg4 Network IP Camera tries to connect to upgrade its
firmware program in flash memory. Mpeg4 Network IP Camera first search this host on the network on
booting sequence. For more information on Mpeg4 Network IP Camera upgrade, refer to “
E. Updating
Mpeg4 Network IP Camera’s newly upgraded Program
”.
MAC Address
is the Ethernet address of Network IP Camera.
Type ‘cs’ keys to change the network configuration in [Boot] prompt. If you type ‘cs’ keys, Mpeg4
Network IP Camera shows you the information you can change its values and the current assigned
values. You can change as the following figure.
-
-
When you terminate hyper-terminal program after you changed network configuration,
hyper-terminal program asks you whether you save the session.
