MPEG4 NETWORK IP CAMERA User’s Guide
20
4.3.2 Assigning IP Address
Follow these steps to assign an IP address using Hyper Terminal
- Execute “Hyper Terminal” on your PC
- Connect RS232 Cable to the serial port of PC that you have selected in Chapter 4.3.1 - Configuring
Hyper Terminal and the Mpeg4 Network IP Camera serial port while Hyper Terminal is executed.
-
Supply power to the Mpeg4 Network IP Camera.
- A count down will start with the message “Press any key to stop auto-boot.”
- Press any key and then “Boot” Prompt shall appear as below.
