MPEG4 NETWORK IP CAMERA User’s Guide
3
Important Note:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IEEE 802.11b or 802.11g operation of this product in U.S.A. is firmware-limited to channels 1through
11.
The availability of some specific channels and/or operational frequency bands are country dependent and
are firmware programmed at the factory to match the intended destination. The firmware setting is not
accessible by the end user.
This equipment generates and radiates radio frequency energy, and must be installed and operated while
maintaining a minimum body-to-camera distance of 3 feet (1 meter).
Trademark Acknowledgments
ActiveX, Apple, Boa, Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, Netscape
Navigator, OS/2, Real, QuickTime, UNIX, Windows, WWW are registered trademarks of the
respective holders. Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other countries.
Video Standard and Product Classification
As the video standard varies country to country, users are asked to check it first and choose right
model. The two most common video standards used are NTSC and PAL.
NTSC is the video system or standard used in North America and most of South America. In
NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual scan
lines.
PAL is the predominant video system or standard mostly used overseas. In PAL, 25 frames are
transmitted each second. Each frame is made up of 625 individual scan lines.
Up to video standard, the models of MPEG4/JPEG dual mode Network IP Camera are as
follows;
