MPEG4 NETWORK IP CAMERA User’s Guide
21
- You can see Network Configuration while [Boot] Prompt is running by pressing ‘ps’ keys again.
Here, IP Address, Netmask, gateway, TFTP server, & MAC address (Ethernet address) values are
network configuration values. You should change these values in most case. If you don’t know what
value you should assign, refer to the network administrator.
IP address
and
subnet mask
addresses are separated by colon (:). For example, IP address is represented
by decimal numbers delimited by dot (.) like ‘192.168.1.27’. Hexadecimal numbers like ‘ffffff00’ in the
case of ‘255.255.255.0’ represents subnet mask address. Note that the numbers of subnet mask value are
not delimited by dot.
Gateway
(g) is the gateway address of Network Camera.
