Weber mt DVH 550 L - 2, Руководство по эксплуатации и техническому обслуживанию, Страница: 19 / 40

DVH550/600
19
3.2 Maintenance overview
All maintenance tasks that must be executed on the roller are listed in two tables. The maintenance tasks in the
first table (section 3.2.1) must be executed at certain times and once after first start up. The maintenance activities
in the second table (section 3.2.2) must be repeated regularly.
The tables are structured identically. In the „Maintenance interval“ column the time or the number of hours is
specified at which/after which the maintenance task must be executed.
In the „Maintenance point“ column the component of the roller is specified on which the task specified in the
„Maintenance task“ column must be performed.
The „Comment“ column contains cross references to sections of this operating and maintenance manual or to
other documents where the execution of the maintenance task is described in more detail.
3.2.1 Initial maintenance
Maintenance interval Maintenance point Maintenance activity
Comment/inst
ructions
After the first 20 operating
hours
Hydraulic system - Change hydraulic fluid filter # 3.3.8
Robin - engine - Change engine oil
# 3.3.1
Total machine - Check all threaded unions for
firm seat, retighten if necessary
After the first 50 operating
hours
Lombardini - engine - Change engine oil # 3.3.1
- Change oil filter # 3.3.2