Webasto 900EX Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 72

background image

36

4.9.1.1 SELECTING MODE

• To select Voltage Control Mode, press the V button on the HMI screen (see Figure

20). This button lights up, while the other mode buttons (CURRENT: I, POWER:

P and RESISTANCE: R) remain dimmed. Similarly, to select Current, Power, or

Resistance Mode, press the HMI button corresponding to the mode.

Figure 20. Selecting the Mode

• After selecting the Control Mode, enter the desired command value (set point) for

the selected Control Mode (V, I, P, or R). Enter in this command value (set point)

by pressing on the corresponding readback value on the HMI (see Figure 21).

• After the command value has been entered, press START to process power (see

Figure 22). The DC Converter will immediately close the contactors to connect the

load (an audible click will be heard).

• The DC Converter starts processing power at the entered command value.
• The Voltage Control Mode has a setting called Internal Resistance. If this value is

set to 0.0 the feature is disabled. If an Internal Resistance value is set, the voltage

will rise or fall (with reference to the command value) based on the current being

synced or sourced, like a battery.

4.9.1.2 ADJUSTING SETTING

Once the DC Converter is running in V, I, P, or R Control Mode, the command
value for that mode can be adjusted as often as necessary (see Figure 21).
Adjustments are made via the up and down arrows located next to the
appropriate display or by pressing the readback value for that mode and entering
in a new command value.

«
...
40
41
42
43
44
...
»

Содержание 900EX









































































Отзывы:

Нет отзывов

Похожие инструкции для 900EX

Бренд: Raymarine Страницы: 90

Бренд: 1010music Страницы: 2

Бренд: 1010music Страницы: 4

Бренд: JB Systems Страницы: 12

Бренд: d.s.f. Страницы: 8

Бренд: Dana Design Страницы: 20

Бренд: YOKOGAWA Страницы: 75

Бренд: Vaillant Страницы: 76

Бренд: H2flow Страницы: 2

Бренд: V-TAC Страницы: 27

Бренд: Yacht Sentinel Страницы: 32

Бренд: X-FLOC Страницы: 35

ABS-Lock III-BE

Бренд: ABS Страницы: 8

NTP TECHNOLOGY DAD Thunder Core 256

Бренд: DAN Страницы: 16

Бренд: Garmat Страницы: 13

Бренд: Gama Sonic Страницы: 4

Бренд: Dräger Medical Страницы: 204

Бренд: WAGNER Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды