Webasto 900EX, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 72

14
The internal contactors remain disconnected during load configuration or
reconfiguration, and will also be disconnected in the event of a load fault
condition (e.g., a short circuit) or an unsafe operating condition (e.g., a voltage
higher than the user-defined limit).
2.5.1 DC SIDE CONNECTOR INTERFACE
All of the manual functions of the 900 EX are controllable with the ROS or other
scripting tool. In addition, there are serial data output, CAN Bus, and ethernet
connectors that are accessible on the DC Connector Panel (Figure 5). Details of
the connector pin outs and the function of each are described below.
Figure 5. Connector Panel with Jumper Connectors
2.5.1.1 REMOTE OPERATION INTERFACE
The Remote Operation Interface is an isolated input based on the RS-232
communication standard and allows communication between the DC Converter
and the 900 EX ROS. The purpose of this interface is to provide status
information and DC output measurements from the 900 EX to the ROS and to
accept commands from the ROS. For more information on the Remote Operation
Interface, please refer to the ROS Manual and/or CAN Interface document.
2.5.1.2 900 EX ROS
ROS is a personal computer-based system for controlling the 900 EX. The
system consists of the computer itself and any peripherals, and the 900 EX ROS
application.
This software provides a graphical user interface for controlling and monitoring
the operation of the 900 EX and a command language interpreter that allows for
simple implementation of complex test programs and communication with the