Block Cooler V1.0
2
A-3. Safety Notice
A-3-1. Certification
The block cooler system is designed to meet the international electrical safety standards
EN61010-1 and EMC regulations. This product designed to meet CE requirements and if
operated according to the guidance of the instruction manual, is certified safe. Any modification
or alteration will void the warranty, void the regulatory certifications and create potential safety
hazards.
A-3-2. Safety Information
¾
Do not apply more or lower than the rated voltage specified on the instrument or it may
cause damages to the instrument.
¾
Do not splash water or liquid onto the block cooler system, the spilled water or liquid
may cause malfunction to the block cooler system.
¾
Do not touch or remove the 48-Well aluminum block directly with hand while heating,
cooling or when the block is still hot or cold.
¾
Do not directly pour water/liquid/ice on the high or low temperature heating block to
cool down or stabilize the temperature of the block to the room temperature. It may
cause damage to the instrument and fast-evaporated water/liquid may be harmful to
the operator.
