Block Cooler V1.0
10
Power cable
1
Instruction manual
1
C-2. Installation of Block Cooler System
C-2-1 Installation Procedure
1.
Carefully pull the block cooler system out of the package box and place it at the work bench.
The work bench should provide the space with the minimum size of 200mm (L) x 304mm (W)
x 184mm (H) [7.87” x 11.97” x 7.24”].
2.
Place the 48-well aluminum block into the block cooler system and place the block protection
rubber on top of the block.
3.
The AC inlet socket is located at the rear side of the block cooler system. Connect the power
cable to the AC inlet socket and plug it into main power source.
4.
Turn on the rear power switch and ensure the power indicator and the LCD display is on and
functional.
