Block Cooler V1.0
14
F. Troubleshooting
Note:
If you notice any malfunction in your block cooler system or it operates in an unusual
way you may initially attempt to solve the problem by following the general symptoms or
error messages, this is when the system encounters a known problem and the corrective
action or solutions given in the following tables below in this section.
Any other than the given solution such as servicing attempts will void the warranty, void the
regulatory certifications and create potential safety hazard. Please contact your local
WEALTEC representative if you are unable to solve the problem.
F-1. General symptom
Symptom
Action and possible solution
Fan is not spinning
LED & Display do not light up
Front panel power on indicator off
Check main AC power source
Replace a new same configuration fuse and try again.
Check if power switch malfunction.
Check if the system displays any errors.
Contact your local Wealtec representative.
Fan is not spinning
LED & Display do not light up
Front panel power on indicator off
Check the main AC power source.
Check if the system displays any errors.
Contact your local Wealtec representative.
Fan is not spinning
LED & Display do not light up
Front panel power on indicator on
Contact your local Wealtec representative.
Intermittent fan, LED or display
Contact your local Wealtec representative.
Requires higher offset value
(More or less than ±12.5
℃)
Contact your local Wealtec representative.
Fuse blown
Change a new same configure fuse and try again.
Contact your local Wealtec representative.
