ײª·-·¾´» °´¿½» ¸±´¼»®
Figure 15. MDS InSite Radio Device User I/O Settings
(Bottom Left-hand Corner of Network Wide Radio Configuration Screen)
These output-only pins are designed for low switching rates and do not
pass high-speed data, nor are they suitable for latency-sensitive remote
controls. An example of this function is to reset the connected remote
RTU or turn on a security device at the associated transceiver
’
s location.
* Voltages are typical and vary with load.
6.5 Upgrading the Radio
’
s Software
Windows-based
Radio Configuration software is available ( P/N
03-3156A01) for upgrading the internal radio software when new fea-
tures become available from us. Contact us for ordering
information, or download new radio software from
www.gemds.com
.
To connect a PC to the radio
’
s
DIAG
port, an RJ-11 to DB-9 adapter
( P/N 03-3246A01) is re quired. If desired, an adapter cable can be
made using the information shown in
Figure 14
.
Using the Radio Configuration software, select
RADIO SOFTWARE
UPGRADE
under the
SYSTEM
menu. Follow the prompts and online
instructions to determine how to proceed.
Green Indicates
current output state
at associated radio
transceiver is
high
.
Click to set
output to
low
.
Table 12. User-Programmable Interface Output Functions
using Transceiver Interface Port
Function
Interface
Pin
States*
Compatibility
Digital Output #1
Pin 22
Set = 3 V
Clear = 0 V
CMOS
Digital Output #2
Pin 15
Set = +9.5 V
Clear =
9.5 V
EIA-232 Compatible
Digital Input
Pin 16
Set = 5 V
Clear = 0 V
CMOS
40 05-3305A01, Rev. E
Содержание 1710 Series
Страница 55: ...05 3305A01 Rev E 47 NOTES...
Страница 56: ...48 05 3305A01 Rev E...
