wayscral 71595, Руководство пользователя

Страница: 49 / 291

49
III. Regular checks
Concerning the tightening of the bolts: lever, crank, pedals, brackets.
The tightening torques to apply are as follows:
COMPONENTS RECOMMENDED TORQUE SPECIFIC GUIDELINES
Pedals on crank arms 30 - 40 Lubricate the threads
Crank arm on bottom bracket 30 - 40 Lubricate the threads
Steering tightness Automatic tightening
Tilt stem Automatic tightening
Headset tightening 14 - 15 Immersion screw (stem)
Brake lever 6 - 8
Brake callipers 6 - 8
Seat 18 - 20
Seat post clamp Quick clamp
Wheel 30
The other tightening torques depend on the nut sizes: M4: 2.5 to 4.0 N.m., M5: 4.0 to 6.0 N.m., M6:
6.0 to 7.5 N.m. Tighten the bolts according to the required torque.
Regularly check the tyres and the tread of the rear wheel: wear, cuts, cracks, pinching. Replace the tyre
if necessary. Check the wheel rims for excessive wear, warping, denting, cracks…
IV. Revisions
For safety reasons and to maintain the components in a good state, you should have your bicycle
revised periodically by your distributor. Your bicycle should also undergo regular maintenance by a
qualified technician.
First revision: 1 month or 150 km
•
Check the components are well-tightened: crank arm, wheel, stem, pedals, handlebars, seat
clamp,
•
Check the power-assistance system is working correctly,
•
Check and adjust the brakes,
•
Tighten and/or straighten the wheels.
Every year or 2000 km:
•
Check the wear levels (brake pads, gear system, tyres),
•
Check the power-assistance system is working correctly,
•
Check the bearings (bottom bracket, wheels, steering, pedals),
•
Check the cables (brakes, derailleur),
•
Check the lighting,
•
Tighten and/or straighten the wheels.