28
Blade Counter Setup
Adjust and position the probe to a suitable position as to conduct a visual inspection. The operation of the Blade Counter analytic requires the probe
to remain stationary.
Adjust the blade aerofoil to simulate entering the desired ‘tracking region.’
Entry Line
The Entry Line is displayed as a blue line. Adjust cursors and position line to coincide with blade edge (Figure 1a and 1b).
Fig 1a. Initial state post-Analytic activation Fig 1b. Adjust Entry Line to aerofoil edge
Press ‘next step’ softkey once complete.
Exit Line
Adjust the blade aerofoil to simulate exiting the desired ‘tracking region’
The Exit Line is displayed as a red line. Adjust cursors and position line to coincide with blade edge (Figure 2a and 2b).
Fig 2a. Initial state post Entry Line assignment Fig 2b. Adjust Exit Line to aerofoil edge
Содержание Everest Mentor Visual iQ VideoProbe
Страница 1: ...Everest Mentor Visual iQ VideoProbeTM Operating Manual MVIQAMANUAL Rev N...
Страница 92: ...92...
Страница 96: ...96 Appendix B Optical Tip Table...
