Wavetronix Click 65 Series, Руководство пользователя

Страница: 30 / 49

CHAPTER 4
• WEB INTERFACE 29
Note
It is recommended you use the
Matrix Full Search
checkbox the first time connec-
tions are made to devices. After a full search has been performed on the connected
sensors, faster searches can be performed with the
Full Search
check disabled to
re-register attached sensors as needed.
When one or more devices has been discovered, they will be listed in their own identifica-
tion box in the Available Sensors section.
Sensors will be listed as “Sensor X” with X being the number of the port to which the sensor
is attached. The label will be accompanied by the appropriate sensor picture for Matrix or
Advance. The sensor listing will also provide the device serial number, along with
Location
and
Description
fields. Matrix devices will also have an
Approach
field.
Note
The
Location
,
Description
, and
Approach
fields for each sensor are taken from the
sensor itself, and are not editable through the Click 65x web interface. Use the appro-
priate SmartSensor Manager software package to change those sensor fields.
The Name field is an optional field that can be used to create a convenient and user-friendly
name to identify this device within the Click 65x web interface. This field is limited to 30
characters and can be left blank. To make changes, type the desired name into the Name
field and push the Save Sensor Names button on top.
This screen also lists the most current communication status for each device, along with
when the device was first discovered.