Wavetronix Click 65 Series, Руководство пользователя

Страница: 10 / 49

CHAPTER 1
• QUICK START GUIDE 9
Figure 1.1 – Click 65x Web Interface
Properties Tab
1
Select the
Properties
tab at the top of the interface and enter a name, location, and
description for the Click 65x.
2
For each BIU number you want the Click 65x to respond to, click the checkbox next to
the number. Leave unused BIU numbers unchecked to avoid controller conflicts with
other cabinet devices.
3
Ensure that the sensor numbers for all ports with sensors attached are checked.
4
Click
Save
.
Note
If the IP address or other network information needs adjusting, you can do that on
this page as well. Click
Save
when finished, and the web interface will automatically
adjust to use the new IP address.
Sensors Tab
1
Select the
Sensors
tab at the top of the interface.
2
To discover Matrix sensors, check
Matrix Full Search
, press
Discover Matrix Sensors
,
and wait until the “Discovering sensors, please wait…” message stops flashing.
3
To discover Advance or Advance Extended Range sensors, press
Discover Advance
Sensors
and wait until the discovery process completes. (This will typically take longer
than Matrix discovery.)
4
Discovered sensors should be listed in the web page. If a sensor does not appear in the
list, make sure it is powered and connected to the back of the Click 65x, and ensure no
previous instance of SmartSensor Manager is currently connected to the sensor.