WaveRider NCL1170, Руководство пользователя

Страница: 77 / 97

APCD–NC006–A 63
ra dio set ting
Displays the current Media Access Control (MAC)
settings for the NCL1170 radio:
• IFS
• slot time
• backoff range
• backoff mode.
ra dio set ting d efault
Changes the default MAC settings for the NCL1170
radio.
ra dio st ation
Displays the list of unit IDs to which the master unit can
talk. Available only if the NCL1170 radio type is Master.
ra dio st ation add (1–16383)
Adds a remote Unit ID to the list of stations to which a
Master Unit can talk. Available only if the NCL1170 radio
type is Master.
ra
dio
st
ation
del
(1–16383)
Removes a remote Unit ID from the list of stations to
which a Master Unit can talk. Available only if the
NCL1170 radio type is Master.
ra dio st ation d isable| e nable
unitID
Disables or enables the transmission capabilities of the
remote station. unitID is the unit ID of the remote station
that you want to disable. Available only if the NCL1170
radio type is Master.
ra dio st atistics | stats
Displays the current radio statistics.
ra dio st atistics | stats r eset
Resets all radio counters to zero.
ra dio tx test sta rt| sto p
Starts and stops the Radio Continuous Transmit Test.
Available only at the Master NCL1170. Use this test to
set up a Master and Station for a new network.
ra dio txrx sta rt| sto p
Starts and stops the Radio Transmit/Receive Loopback
Test. When you start this test, the Radio PER display is
also automatically started. Available only at the Master
NCL1170. Use this test for a new installation only.
ra dio t ype
Displays the NCL1170 radio type.
ra dio t ype mas ter| sta tion
Changes the radio type. Use this to configure an
NCL1170 as a master unit. All NCL1170 units are
factory-configured as ‘station’.
ra
dio unitid
Displays the NCL1170 unit ID.
ra dio unitid (1–16383)
Changes the NCL1170 unit ID. An NCL1170 unit ID is a
unique number between 1 and 16383.
sn mp
Displays the SNMP configuration information. SNMP is
useful for monitoring network performance and
debugging.
sn
mp
com
munity
Displays the SNMP community table. The default SNMP
communities are: public read and private write.
Command Syntax Description