WaveRider NCL1170, Руководство пользователя

Страница: 75 / 97

APCD–NC006–A 61
ip ri p interval
Displays the length of time (in seconds) that an
NCL1170 waits before transmitting updated RIP
information.
ip ri
p interval ( XX)
Assigns a duration (in seconds) that an NCL1170 waits
before transmitting updated RIP information.
ip ri
p
nod
efault|
d
efault
Disables or enables RIP to advertise the default route.
Available only if routing mode is set to RIP.
default
- if a default route exists, it is sent in the
advertisement.
nodefault
- the default route is not sent, whether or
not it exists.
ip ri p nou pdate| u pdate
Disables or enables RIP advertisement of static routes.
update
- sends static route information in a RIP
advertisement, as well as all other RIP information.
noupdate
- sends everything except the static route
information. Available only if routing mode is set to RIP.
ip ri p q uiet| a ctive
Disables or enables RIP advertisement of static routes.
Available only if routing mode is set to RIP.
active
- transmits route information, in packets, to the
interfaces.
quiet
- disables RIP packets from being sent.
ip ri p v ersion 1|2 ip rip version
displays the current version.
Switches 1 or 2, display/change RIP to the respective
version. Available only if routing mode is set to RIP.
Note that version 1 is broadcast only; version 2 can be
multicast, broadcast, or compatible (both).
ip route
Displays the routing table information. Local interface
routes are always present as long as an address for the
interface exists.
ip route add | del
Network(aaa.bbb.ccc.ddd)
Gateway(eee.fff.ggg.hhh)
Mask(0-32)
Adds or deletes a static route.
Network(aaa.bbb.ccc.ddd)
is the IP address of
the destination network;
Gateway(eee.fff.ggg.hhh)
is the IP address for
the gateway; and
Mask(0-32)
is specified in either
dotted decimal format or number of bits.
ip route f lush
Removes all dynamic entries from the routing table.
Dynamic entries are those routes that the system has
learned.
ip route e rase
Removes all static and dynamic entries, except
interface routes, from the routing table.
ip st atistics
Displays the IP statistics information.
ip te lnet host(aaa.bbb.ccc.ddd)
Establishes a Telnet session with a remote host to
access and control a remote computer.
host(aaa.bbb.ccc.ddd)
is the IP address of the
remote host.
Command Syntax Description