WaveRider NCL1170, Руководство пользователя

Страница: 74 / 97

60 APCD–NC006–A
ip addr ess radio remote_unit_id
aaa.bbb.ccc.ddd eee.fff.ggg.hhh
Changes the radio interface IP route and binds the radio
channel between the remote NCL1170 and the local
NCL1170 using the IP addresses. This command is only
available in routing mode.
For an NCL1170 configured as a Station,
remote_unit_id is the unit ID of the remote master;
aaa.bbb.ccc.ddd
is the radio IP address for the local
station NCL1170; and
eee.fff.ggg.hhh
is the radio
IP address for the remote master NCL1170.
For an NCL1170 configured as a Master, remote_unit_id
is the unit ID of the remote station NCL1170;
aaa.bbb.ccc.ddd
is the radio IP address for the local
master NCL1170; and
eee.fff.ggg.hhh
is the radio
IP address for the remote station NCL1170. Repeat this
command for each station in the Remote Station List.
ip d ns
Displays the DNS configuration information.
ip d ns s erver
Displays the list of domain name servers.
ip d
ns
s
erver
add
|
del
aaa.bbb.ccc.ddd
Adds or deletes a server from the DNS table.
aaa.bbb.ccc.ddd
is the IP address for the DNS
server that you want to add or delete.
ip d ns dom ain
Displays the DNS domain name.
ip d
ns
dom
ain DNS_domain_name
Changes the DNS domain name.
DNS_domain_name
can be a maximum of 256 ASCII characters.
ip p
ing destination
Sends ICMP echo requests to a remote host that is
used to see if you can reach a remote IP address or for
network debugging.
destination
is the radio IP
address for the remote host that you want to reach.
ip ri p
Displays the Routing Information Protocol (RIP)
configuration. Available only if routing mode is set to
RIP.
ip ri p b roadcast| m ulticast
Specifies how the RIP handles packets.Available only if
the routing mode is set to RIP, and the RIP version is 2.
•
broadcast
sends RIP version 2 advertisements
as broadcast.
•
multicast
sends version 2 advertisements to
RIP version 2 multicast addresses. Multicast is
generally more efficient than broadcast.
ip ri p d isable| en able
Disables or enables the RIP
ip ri p expire
Displays the length of time an NCL1170 waits before
deleting a RIP route.
ip ri p expire (XX)
Assigns a duration (in seconds) that an NCL1170 waits
without receiving any RIP updates before it will consider
that route invalid, and delete it.
Command Syntax Description