WaveRider NCL1170, Руководство пользователя

Страница: 47 / 97

4 Configuring the NCL1170
APCD–NC006–A 33
4.5.2 Establishing a Telnet Session
Use a Telnet connection to the NCL1170 to modify configuration parameters or to restart the
NCL1170 from a remote location.
CAUTION: If you connect to the NCL1170 using Telnet and change the Routing
Tables, Mode, or Radio or Ethernet IP addresses, your connection to the device
may be dropped. You will need to reconnect to the NCL1170 using the new IP
address in order to save your changes to the device. When you use a local serial
connection, this does not occur.
You can use a standard Telnet application to connect to the NCL1170.
1. Start the Telnet application on your computer.
2. Use a remote system connection to connect to the IP address for the NCL1170.
3. At the Password prompt, type the NCL1170 password. The application opens a
terminal-emulation screen.
4. Modify the configuration parameters as necessary.
5. When done, type
<exit>
to close the Telnet session.
NOTE: If you restart or reboot while connected to the NCL1170 through
Telnet, it will drop your connection. After restarting, you must
reconnect to the NCL1170 before continuing.