WaveRider NCL1170, Руководство пользователя

Страница: 32 / 97

4 Configuring the NCL1170
18 APCD–NC006–A
4.1 Setting the Radio Configuration
Before setting the radio configuration parameters, ensure that the NCL1170 has been
connected to a terminal and initialized as described in
Connecting the NCL1170 , on page 12,
and that the password has been set as described in Changing the NCL1170 Password , on
page 15.
WARNING!
Antennas and associated transmission cable must be installed
by qualified personnel. Failure to terminate the antenna port
correctly can permanently damage the NCL1170. WaveRider
assumes no liability for failure to adhere to this recommendation
or to recognized general safety precautions.
1. Determine the radio channel for the network. See Appendix C for a list of operating
frequencies.
2. At the
NCL1170>
prompt, type
<radio channel channel >
to set the radio
channel for the NCL1170, where
channel
is the number of the network radio channel
on which the unit will operate.
3. Determine the unit IDs for the Master and Stations for this NCL1170 network group.
The unit ID is a unique number, from 1 to 16383, that is used to identify the NCL1170
within the network group.
4. At the
NCL1170>
prompt, type
<radio unitid unit_id >
to set the NCL1170 unit
ID.
5. To set the NCL1170 as a Master, type
<radio type master>
. To set the NCL1170
as a Station, type
<radio type station>
.
If the NCL1170 is a Master, add the unit IDs for the Stations that are configured for this
network group. At the
NCL1170>
prompt, type
<radio station add
station_unitid >
where
station_unitid
is the unit ID for a Station.
NOTE: To remove a Station from the Remote Station List, type
<radio
station del station_unitid >
where
station_unitid
is the unit ID for the Station you want removed.
6. Repeat step for each Station that you want to add to the Remote Station List for the
Master NCL1170. A maximum of 20 Stations can be added to one Master.
7. If the NCL1170 is a Station, add the Master unit ID for the network group. At the
NCL1170>
prompt, type
<radio masterID master_unitid >
where
master_unitid
is the unit ID for Master NCL1170 in the network group.
TIP: To display a list of Stations associated with a
specific NCL1170 Master, type
<radio station>
at the
NCL1170>
prompt.