UNIT DESCRIPTION
The Watt Stopper CI-300 360° passive infrared (PIR) occupancy sensors turn lighting
systems on and off based on occupancy and ambient light levels. The light level
feature keeps lights from turning on if the ambient light level is sufficient.
The sensors can be configured to turn lighting on, and hold it on as long as the
sensor detects occupancy. After no movement is detected for a user specified or
SmartSet time (5 to 30 minutes) the lights are switched off. A “walk-through” mode
can turn lights off after only 3 minutes, if no activity is detected after 30 seconds of
an occupancy detection.
The CI-300 operates on 24V supplied by Watt Stopper Power Packs, 24VAC, or half
wave rectified AC. CI-300 sensors also have an isolated relay with Normally Open
and Normally Closed contacts for interfacing with HVAC or EMS.
COVERAGE PATTERN
The CI-300 provides a 360° coverage pattern. Two lens patterns are available. The
CI-300 provides up to 1200 square feet of coverage and the CI-300-1 provides up to
500 square feet of coverage. The coverage shown represents walking motion at a
mounting height of 8 feet. For building spaces with lower levels of activity or with
obstacles and barriers, coverage size may decrease.
Call 800.879.8585 for Technical Support
24 ft
7.3m
CI-300-1 Coverage Pattern (high density, reduced range lens)
44 ft
13.4m
CI-300 Coverage Pattern (standard lens)
8 ft
22 ft
13 ft
7 ft 3 ft 0 3 ft 7 ft
13 ft
22 ft
Typical
desk-top
level
8 ft
12 ft
12 ft
3 ft
3 ft
5 ft
5 ft
7 ft
7 ft
9 ft
9 ft
0
Typical
desk-top
level
Drawings not to scale.
