![background image](http://html.mh-extra.com/html/watts/bar-positrol/bar-positrol_mounting-and-operating-instructions_876746020.webp)
20
English
Operating Instructions
bar-positurn2 and bar-positrol
Manual Initialisation of 3-Position mode (learning end positions and other specific values):
9. Start up by switching back initialisa
tion switch from „Init“ to „Run“.
10. Set the middle position by terminal 3 (24
VDC) and adjust via the Potentiometer.
11. Subsequently drive to the desired end
position.
The green statusLED illuminates and
a yellow LED illuminates depending on
the particular end position.
12. Commissioning is finished.
or
or
2
6