![background image](http://html.mh-extra.com/html/watts/bar-positrol/bar-positrol_mounting-and-operating-instructions_876746018.webp)
18
English
Operating Instructions
bar-positurn2 and bar-positrol
Manual initialisation of Positioner mode (learning the positions and other specific values):
1. Check whether the
operating direction
switch
has been set in accordance with
the operating direction of the actuator
(L/ccw or R/cw).
2. Link electrical connections according to
the connection diagram.
3. Select program by the program switch:
Choose „analog“ (see also „individual
settings”).
4. Choose type of signal.
5. Set the initialisation switch to „Init“.
6. Establish power supply.
chaser light illumiates
7. The actuator has to be driven to each
end position at least two times by ma
king use of the emergency manual over
ride of the solenoid valve. Alternatively,
terminals 1 and 2 can be connected
alternately with terminal 13 (24 VDC).
Terminal 1 and 2 have to be supplied
with power for more than 10 seconds
after the end positions are reached.
8. Initialisation is completed successfully
when all LEDs illuminate permanently.
9. Start up by switching back the Initiali
sation switch from „Init“ to „Run“.
10. Commissioning is completed.
1
3
5
6
6