SmartPlate EV Installation, Operation and Maintenance Manual
CHAPTER 1
– GENERAL INFORMATION
OMM-0147_C
• SP-102 • 3/2/2021 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
6
of
72
1.2 INTRODUCTION
This manual provides detailed coverage for the AERCO SmartPlate
®
EV line of Water-to-Water
Heaters. All SmartPlate EV models are equipped with an Electronic Control System (ECS II)
and an electronic 3-Way Control Valve. This Control System and Valve combination is used with
all SmartPlate EV models and sizes.
There are five SmartPlate EV Double-Wall Heat Exchanger Water Heater models available:
SPDW-EV30, SPDW-EV40, SPDW-EV60, SPDW-EV90
Figure 1.1 shows the major components and direction of water flow in a SmartPlate EV, shown
enclosure covers removed.
1. Boiler Water Inlet (
from
boiler)
2. Domestic Hot Water Outlet
3. Boiler Water Outlet (return
to
boiler)
4. Domestic Hot Water Inlet
5. 3-Way Control Valve and By-Pass Outlet (shown plugged)
6. Heat Exchanger
7. Pressure Relief Valve
8. ECS II, the Electronic Control System
9. Power Box
10. Flow Meter
FRONT
-
RIGHT VIEW
FRONT
-
LEFT VIEW
Figure 1.1. SmartPlate EV Components and Water Circulation
7
8
9
1
2
3
4
6
5
10
