Watts Battery WBX 1, Руководство пользователя

Страница: 25 / 36

Open the terminal connector [18] (input with
PV panel) on the previously installed block
using the supplied hex key. Keep an eye on the
cover and original bolts.
• Make sure that the protective
[20] switch is turned off.
• The power supply to the
block and the cable [19] are
disconnected.
The most efficient connection per block is a
series-parallel connection consisting of six
photovoltaic cells with a capacity of 200 W
each.
We recommend that you refer to the diagram.
Do not connect photovoltaic panels with a
power of more than 250W directly to WATTS,
use lightning protection devices. (SPD with
varistors)
• Do not exceed 1 kW of
photovoltaic panel power per
WATTS.
• All plug-in panels must be
identical to each other.
• The voltage level of the open
circuit may vary and depends
on the environment.
Connection and operation
OWNER’S MANUAL - WATTS
STEP 1
STEP 2
ATTENTION! All work in this section is to be performed by qualified personnel. An untrained
person puts himself at risk of injury or death.
The connection of photovoltaic panels
20
19
24