Watts Battery WBX 1, Руководство пользователя

Страница: 16 / 36

Setting up an Internet connection
To set up a connection to WATTS and the Internet, install the latest app from the APP store or Google Play
on your smartphone. Below are the installation steps screens, the app may differ from the latest version.
The app is free, but your mobile carrier may charge you extra for downloaded traffic.
WATTS Battery (3+)
download link
WATTS Battery (3+)
download link
1
2
1
2
3
1
2
1
2
3
STEP 1 STEP 2
CONNECTION AND OPERATION
OWNER’S MANUAL - WATTS
1. Open the app and tap +
2. Double-click on
the power button
WATTS,
The button [14] should
flash blue
1. After synchronization and detection, WATTS
will appear in the list.
2. You can see the charge percentage as well as
the actual capacity.
3. Click on the WBX icon area.
1
2
1
2
3
1
2
1
2
3
Install WATTS in a place you chose, with good
ventilation. Do not install WATTS upside down
or on its side. All supports [10] must touch
the surface of the installation site. Consider
the weight of the device 14 kg (30,8 lbs) when
choosing a place.
The free space around the
block (blocks) should be at
least 25 cm (10 in).
Turn on the Protective switch [20]
Do not forget to turn off
the safety switch when
switching off WATTS.
Connect the block to a single-phase network
(~230 V 50 Hz/110 V 60z) using the supplied
cable [19] . Or connect WATTS to the switchboard,
see the corresponding chapter.
At the moment of
connection, there may be an
instant spark, this is normal,
do not pull the plug.
Make sure that all power cables are connected
correctly by pressing the power button [12]
After the first power-up, wait
until WATTS is fully charged
[13] and only then connect
the load (devices).
Connect the load [2-4] , which does not exceed
1000 Watts for 120V 60Hz or 1500 Watts for 230V
50Hz per block, when working from the power grid
(bypass) no more than 3000 watts per block.
In the event of an overload,
WATTS will be disabled in
an emergency.
2
15