Watts Battery WBX 1, Руководство пользователя

Страница: 20 / 36

• Put the installation in a well-ventilated area.
• Do not place the block upside down or on its side.
• Install the lower block (master) so that all supports
[10] touch the surface of the installation site.
• When choosing a place, consider the weight of
each block of 14 kg. (30.8 lbs).
• The total number of blocks in the stack must not
exceed 10.
• The free space around
the block (s) must
be at least 25 cm (10
inches).
• The distance to the
switchboard should
not exceed 2 meters
(3 ft.).
• The first block from
the ground is always a
master.
Open the terminal ports [18] with a hex key (AC
single phase 230 V out./ 230 V in. or 120V/120V) as
shown in the image.
• Check that the
safety switch [20] is
switched off.
• Make sure that no
wires are connected to
WATTS.
• Keep an eye on the
unscrewed covers.
• The terminal
connector’s covers
must be removed from
the master only.
Connection and operation
OWNER’S MANUAL - WATTS
STEP 1
STEP 2
ATTENTION! All work in this section is to be performed by qualified personnel. An untrained
person puts himself at risk of injury or death.
Installing a stack (multiple WATTS)
18
Recommendations for choosing the amount
of WATTS, and the relative battery life.
19