WattAge egret, Инструкция по сборке

Страница: 7 / 36

7
LANDING GEAR ASSEMBLIES
❑
{2} 45mm Diameter Wheels
❑
{1} 25mm Diameter Wheel
❑
{1} Prebent Nose Gear Wire
❑
{1} Nylon Landing Gear Strap
❑
{2} 3mm x 20mm Machine Screws
❑
{4} 3mm Nylon Insert Nuts
❑
{2} 2.5mm x 10mm Wood Screws
❑
{1} 1.5mm Wheel Collar
❑
{1} 3mm x 4mm Machine Screw
FUSELAGE MOUNTING ASSEMBLIES
❑
{2} 9-1/2" Aluminum Tubes
❑
{2} 7-5/8" Aluminum Tubes
❑
{2} 5-3/8" Aluminum Tubes
❑
{1} Aluminum Spreader Bar
❑
{3} 3mm x 20mm Machine Screws
❑
{2} 3mm x 10mm Machine Screws
❑
{5} 3mm Hex Nuts
❑
{2} 2mm x 6mm Wood Screws
❑
{2} 2mm x 12mm Machine Screws
❑
{2} 2mm Hex Nuts
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Shown below are full size drawings of the small hardware parts included with the Egret ARF. Use these
drawings to familiarize yourself with each part. Please refer back to this page to locate the proper parts when
they are needed for a particular assembly step. These drawings are especially helpful when trying to identify the
different size screws or nuts used in a particular step.
FULL SIZE HARDWARE DRAWINGS
29
30
31
32
33 34
35
36
37
38
39
40
41
42
43
44
45
46
47
3mm x 20mm
Machine Screw
3mm x 10mm
Machine Screw
2.5mm x 10mm
Wood Screw
2mm x 10mm
Wood Screw
2mm x 12mm
Machine Screw
2mm x 6mm
Wood Screw
3mm Hex
Nut
3mm Nylon
Insert Nut
3mm x 4mm
Machine Screw
2mm Hex
Nut
The Egret includes one extra motor pinion gear. The stock gear that comes preinstalled on the motor is a 14T
gear. This gear gives great overall performance. The extra pinion gear provided is a 12T gear. Replacing the
stock gear with this one will slow propeller r.p.m. down, but will improve flight times.