• Do not crimp or bend drain lines. A crimp or bend can impede flow to the waste
container.
• Empty the waste container before the lower ends of the drain tubes are covered by
waste solvent.
3. Route the waste lines to the waste container. If necessary, shorten the waste tubes so their
ends are above the surface of the waste solvent.
Figure B–9: Positioning of drain tube
Correct
Incorrect
B.7 Connecting to the workstation
Warning:
To avoid injury from electrical shock or fire, and damage to the equipment, follow
these guidelines:
• Do not expose the workstation or ancillary equipment to dripping or splashing liquids.
• Do not place objects filled with liquid, such as solvent bottles, on top of the workstation or
ancillary equipment.
Before connecting the workstation to the instrument, set up the workstation according to its
accompanying instructions. Locate the workstation within 5 meters (16 feet) of the instrument.
January 10, 2022, 715006200 Ver. 01 (previously released as Rev. A)
Page 164