Waters Network Systems
User’s Manual
Page 13
PSX/MS1008-TX
attachment of cables, power cord and air circulation.
3.6.1
Attaching Rubber Feet
1. Make sure mounting surface on the bottom of the switch is free of grease and dust.
2. Remove adhesive backing from the rubber feet.
3. Apply the rubber feet to each corner on the bottom of the switch.
Figure 3-8. Attaching rubber feet to each corner on the bottom of the switch
3.6.2 Power
On
Connect the power cord to the AC power socket on the rear panel of the switch. Check
the power indicator on the front panel to see if power is properly supplied.
