Waters Network Systems
User’s Manual
Page 12
PSX/MS1008-TX
3.5 LED
Indicators
Figure 3-7. LED Indicators for 1008-TX switch
There are three LED-Indicators (100M, LK/ACT, FDX/COL) for each of the eight
10/100Base-TX copper ports. The following table provides the status and description of
the LEDs. The LEDs provide a real-time indication of systematic operation status.
Ethernet Port
LED
Status
Color
Description
Power
On Green
Power
On
On Green
The port is operating at the speed of
100Mbps
100M
Off
In 10Mbps mode or no device is attached
On Green
The port is successfully connecting with the
device
Blinks
Green
The port is receiving or transmitting data
LNK/
ACT
Off
No device is attached
On
Orange
The port is operating in full-duplex mode
Blinks
Orange
Collision of packets occurs in the port
FDX/
COL
Off
Half-duplex mode or no device is attached.
Table 3-1. LED Description
3.6 Desktop
Installation
Choose a surface for your switch that is clean, smooth, level, sturdy and with a power
outlet nearby. Make sure there is enough clearance around the switch to allow
