Waters Network Systems
User’s Manual
Page 35
PSX/MS1008-TX
o
Firmware Version
– Displays the switches firmware version.
o
Hardware Version
– Displays the switches firmware version.
o
Kernel Version
– Displays the default EEPROM value.
Advanced Switch Settings
– The following switch settings are displayed through
this option:
o
Miscellaneous Settings
MAC Address Age-Out Time
– Enter the number of seconds that
an inactive MAC address remains in the switch’s address table.
The valid range is 300 ~ 765 seconds. The default is
300
seconds
.
Max Bridge Transit Delay Bound Control
– Limit the packets
queuing time in the switch. If enabled, the packets exceeding the
queue will be dropped. Valid values are 1, 2 or 4 seconds and Off.
The default is
1 second
.
Broadcast Storm Filter
- This option is used to configure the
broadcast storm control. It must be enabled and then the upper
threshold must be set for the individual ports. The threshold is the
percentage of the port’s total bandwidth used by broadcast traffic.
When the broadcast traffic for a port rises above the threshold that
has been set, broadcast storm control becomes active. The valid
threshold value is 5%, 10%, 15%, 20%, 25% and Off.
o
Priority Queue Service Settings
First Come First Service
- The sequence of packets sent depends
on the arrival order.
All High before Low
- The high priority packets are sent before the
low priority packets.
Weighted Round Ratio
- Select the preference given to packets in
the switch's high-priority queue. These options represent the
number of high priority packets sent before one low priority packet is
sent. For example,
2 High: 1 Low
means that the switch sends 2
high priority packets before sending 1 low priority packet.