Waters Network Systems GSM2109-1009-8PoE, Руководство по эксплуатации

Страница: 98 / 108

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 98
The following table lists the SystemLog, SMTP and Events Commands.
Command Level Description Example
systemlog ip
[IP address] G Set IP address of system log
server switch(config)#systemlog ip
192.168.1.100
systemlog mode
[client|server|bot
h] G Specify the log mode switch(config)#systemlog
mode both
show systemlog E Display system log Switch>show systemlog
show systemlog P Display system log, client and
server information switch#show systemlog
no systemlog G Disable system log function switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address] G Configure SMTP server IP switch(config)#smtp serverip
192.168.1.5
smtp
authentication G Enable SMTP authentication switch(config)#smtp
authentication
smtp account
[account] G Configure authentication
account
switch(config)#smtp account
user
smtp password
[password] G Configure authentication
password
switch(config)#smtp password
smtp rcptemail
[Index] [Email
address] G Configure e-mail address for
receipt of alerts switch(config)#smtp rcptemail
1
alert@test.com
show smtp P Display SMTP information switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event
device-cold- start
[Systemlog|SMT
P|Both] G Set cold start event type switch(config)#event
device-cold-start both
event
authentication-
failure
[Systemlog|
SMTP|Both]
G Set authentication failure event
type switch(config)#event
authentication-failure both
event X -
-ring-topology-
change
[Systemlog|
SMTP|Both] G Set X-ring topology event type switch(config)#event X -
-ring-topology-change both
event systemlog
[Link-UP|Link-
Down|Both] I Set port event for system log switch(config)#interface
fastethernet 3
switch(config-if)#event
systemlog both