Waters Network Systems GSM2109-1009-8PoE, Руководство по эксплуатации

Страница: 71 / 108

Waters Network Systems GSM2109-1009-8PoE User’s Manual Page 71
Figure 5.37 - X-ring Interface
Note: When the X-ring function is enabled, RSTP must be disabled. The X-ring
function cannot exist at the same time as RSTP. Remember to save configuration so
the new settings will be saved if the switch loses power.
5.29 802.1X - Security Configuration
Use the Security menu to configure 802.1x and port security by MAC address. 802.1x
is an IEEE network standard that allows a client to connect to a wireless access point or
wired switch, but prevents the client from gaining access to the Internet until proper
authentication has taken place. Authentication is supplied through user name and
password which are verified by a separate server.
802.1x/Radius
Once the 802.1x function has been enabled, you are ready to configure the parameters
for this function.
ƒ
IEEE 802.1x protocol - enable or disable 802.1x protocol.
ƒ
Radius Server IP - set the Radius Server IP address.
ƒ
Server Port - set the UDP destination port for authentication requests to the specified
Radius Server.
ƒ
Accounting Port - set the UDP destination port for accounting requests to the