WaterRower WRM7060, Руководство пользователя

Страница: 16 / 28

16
1) To pump water, turn the knob clockwise to close valve as shown in figure A
2) Locate water source above (higher than) water destination:
▪ See Figure B for filling tank
▪
See Figure C for emptying tank
3) Squeeze pump 4-5 times until water flows
4) Turn knob counter-clockwise to allow air into the pump and end syphon.
HOW TO FILL AND EMPTY THE TANK
A B C
WATER LEVEL
The Level Gauge is positioned on the side of the tank. Information on the sticker includes
WaterRower contact information and the Water Level Gauge. The maximum level to fill the
tank is Level 19. DO NOT fill above the maximum level - this could void the warranty. The
standard Calibration Level is Level 17.