WaterRower WRM7060, Руководство пользователя

Страница: 12 / 28

12
STEP 1
Lay the rails on the floor and connect the rear spacer using the female JCN nuts and the Allen
keys provided.
STEP 2
Place the seat assembly between the rails with the indent facing towards the rear spacer.
The larger vertically mounted wheels (the load wheels) should sit on the plastic extrusions on
the top of the rail. The smaller horizontal wheels below the seat (the guide wheels) should sit
between the rails. It may be necessary to separate the rails slightly to allow the guide wheels
to fit down between the rails.
Rear Spacer
The black extrusions are
facing the inside of the rails.
JCN Nut (x4) Allen Keys
STEP 3
Place the tank assembly between the rails.