48
|
56
Switching the Concentrate Source Mode—System View
1
Use the illustrations and instructions to understand
the system activity when you set it to an auxiliary
concentrate source.
Note:
For instructional purposes, this illustration
only focuses on the specific activity in the
system that best conveys the topic.
1 When set to auxiliary supply mode, a valve is
used to change the concentrate source from the
on-board supply tank to the auxiliary system.
When sourcing concentrate from an auxiliary
source, the system cannot measure the supply
level—the concentrate supply must be
managed by the operator.
Note:
Do not operate the equipment without
providing concentrate or water to pump
through the system.
