Waterous 200-B, Инструкция по установке и обслуживанию

Страница: 13 / 54

Waterous 200-B Belt-Driven Installation Guide Rev-
Page 13 of 54
D. T-Sump Drain
The drain and the output to the hydraulic filter share an outlet port.
To Hydraulic
Filter
Drain
SECTION 4. OIL TEMPERATURE GAUGE (ALL SUMPS)
Mount the gauge on the pump operator's control panel where it will be easy to monitor.
The gauge connects to the larger of the
two prongs on the sender.
The smaller prong, which is labeled "WK",
may be used to activate an oil temperature
warning light or alarm (not provided).
Waterous recommends installing an over-
temperature device.
This prong is one side of a temperature
sensitive switch that will close at 250°F.
The other side is grounded through the
metal of the sump.
The prong can be connected to the
negative side of an audible alarm or
warning light.
Follow the installation instructions in the
temperature gauge box to connect the
sender to the gauge and the optional
warning light.
Figure 8 Temperature sender
on Sump