Dual Sensor
Water/Soap Dispenser
Installation Manual
Installation Diagram
9. Connect tightly the head of sensor cable for
soap (white) of the spout body (13) to the
sensor connector for soap dispenser (18) of
the control module.
ATTENTION:
Align the direction of the arrow of each head between spout
body and control module. Make sure each head of spout
body is connected correctly to each head of control module.
10. Connect tightly the head of sensor cable for
faucet (14) of the spout body to the sensor
connector for faucet (19) of the control module.
11. Connect soap tube (12) of spout body to soap
outlet (17) of the control module and fit tightly
by using the provided clip fastener (37).
