Dual Sensor
Water/Soap Dispenser
Installation Manual
Installation Diagram
Installation Diagram
4. Secure the control module to the wall using
the provided template.
5. Make sure the control module is tightly fastened.
6. Tightly connect mixing valve (34) to water
(25) inlet of the control module.
7. Tightly connect the hot water hose (red) to the
hot side of mixing valve and do the same for the
cold water hose (blue).
DO NOT BEND THE HOSES.
8. Connect the provided rubber washer (35) to
the outlet for water (16) on the control module
and tighten the outlet hose (11) to it.
MAKE
SURE TO USE THE PROVIDED RUBBER WASHER.
