Dual Sensor
Water/Soap Dispenser
Installation Manual
Installation Diagram
Soap canister mount installation.
12. Drill a screw hole in the wall by using “template
for soap canister mount.”
13. Screw in the soap canister mount (29) and make
sure it is tightly fastened and does not wobble.
14. Connect the provided black tube (36) to soap
outlet (28) to control module of soap canister and
fit tightly by using the provided clip fastener (37).
Connect the other side of the black tube to the inlet
for soap of control module (24) and fit tightly by using
the provided clip fastener (37).
15. Open the refill cap (32) and pour foaming soap into
soap canister. After refilling, replace refill cap.
NOTE: ONLY USE FOAMING SOAP.
