WaterLogic WL800 - MAX II, Руководство пользователя

Страница: 9 / 74

WL800 Manual Page 9 – Revision 12-11-2018
CONTROL PANEL INSTRUCTIONS
The above shows front LCD display and control panel for the Waterlogic WL800 Water Treatment
System.
Button Operational Use
Heating LED is on when heater is working
Chilling LED is on when cooling system is working
UV
LED is on when UV sterilization light is on. UV sterilization
has UV light inside. Water runs through UV sterilization filter
and UV light sterilizes the water. UV light is on when nobody
uses the device for more than an hour. UV indicator is on
when UV light is on. The UV recirculating system starts when
the WL800 Water Treatment System is idle and unused for
one hour. The UV system will operator for 1 hour every 4
hours that the WL800 Water Treatment System is idle. (1
hour ON, 3 hours OFF).
Service
LED is on when a water leak is detected. Contact your
Service Center as soon as you find the Service LED on.
Sleep Mode
Button
Sleep mode is defaulted to OFF. If you would like to place
the WL800 Water Treatment System into sleep mode
manually, depress the sleep Mode Button. After 72 hours, if
the WL800 remains idle and unused, the unit will enter sleep
mode. To awaken the WL800 from sleep mode, you will
need to dispense 20 ounces of water from the machine (hot
or cold) which will start the Hot Tank heater.
Sleep Mode Button