WaterLogic WL800 - MAX II, Руководство пользователя

Страница: 42 / 74

WL800 Manual Page 42 – Revision 12-11-2018
DESCALING THE HOT TANK
1. The Hot Tank requires removal of mineral deposits (descaling) on a regular basis, depending upon
filtration and local water conditions. Descaling is an important process that removes calcium
deposits, or scale, that can build up inside a tank over time. Calcium and scale is non-toxic but left
unattended, it will hinder your unit’s performance.
Descaling should take place every 6 to 12 months to preserve the long-term health of your unit. Use
non-toxic cleaner such as ScaleKleen, DEZCAL, 20% Citric Acid Solution, or Undiluted Vinegar
Solution to remove mineral deposits as directed by the manufacturer.
WARNING! PERSONAL PROTECTIVE EQUIPMENT REQUIRED. Always ensure proper ventilation
and use rubber or nitrile gloves and eye protection when using chemicals. Refer to Material
Safety Data Sheet for specific requirements of each product.
CAUTION! STAINLESS STEEL TANK DESCALING
.
The Hot Tank is made from stainless steel. Ensure descaling solution is compatible with stainless
and always flush the unit completely. Dispose in an environmentally safe manner.
See Hot Tank Descaling Video and training procedure located on the Partner Area of the
Waterlogic Website for more detailed instructions. www.waterlogic.us
Materials Needed:
•
Personal Protective Equipment. Rubber or Nitrile Safety Gloves and Protective Eyewear
•
Phillips Screwdriver
•
Temperature Gauge
•
Water Pitcher or Container to collect water from the faucet
• 20 Liters (5 gallons) container or drain basin
• Citric Acid Based Cleaner
• Food Coloring
2. Mix descaler per directions and 3 drops of food coloring into the
descaling cartridge.
3. Turn off Power to unit.
4. Turn off Water Supply.
5. Remove Top Cover.