background image

4

Waterlogic 4 Firewall Technical Manual - Issue A, October 2010

55

STANDARD COLD TANK (2 Litres)

The  standard  cold  tank  is  manufactured  from  304  StainlessSteel  which  is 

noncorrosive. The temperature of the Cold Tank is controlled by a microprocessor 

and can be set between 3°C and 12°C.We recommend the cold water to be set at 

5°C, this being ideal temperature for a cold drink. The capacity of the tank is 2 litres.

HOT TANK

The hot water temperature is controlled by a Microprocessor and can be set between 

70°C and 93°C.It is recommended that the hot temperature is set at 87°C, this being 

the ideal temperature for instant drinks. A thermal cut out is fitted to the Hot Tank to 

prevent overheating. The tank is fed water via a polyphosphate filter to increase the 

tank life. Setting the hot water temperature at 87°C also helps stop scale forming in 

the hot tank, prolonging the 500Watt element and the Hot Tank.

FILTERS

The filtration system on the WL4 Firewall is designed to reduce dirt and sediment 

particles from the water. Furthermore, the Activated Carbon process will remove a 

whole range of contaminants e.g. chlorine and pesticides. It is important for the UV 

sterilization system to be supplied with clean water in order to achieve maximum 

efficiency.  There  are  many  kinds  of  different  filter  combinations  available  from 

Waterlogic to suit local water conditions.

FIREWALL CHAMBER

The Firewall chamber incorporates the in-Faucet UV and is made of stainless steel 

and is highly reflective.The Chamber houses the UV lamp and quarts spiral as well 

as the faucet

Machine Overview 

HIGH CAPACITY COLD TANK (4,5 Litres) 

The high capacity cold tank is a unique combination of ice bath and direct chill, and 

is manufactured from 304 Stainless Steel which is noncorrosive and inert. 

The temperature of the Cold Tank is controlled by a microprocessor and can be set 

between 3°C and 5°C. We recommend the cold water to be set at 5°C, this being 

ideal temperature for a cold drink. The capacity of the tank is 4.5 litres.

WATERLOGIC 4 FIREWALL

The Waterlogic 4 Firewall is available 

in the following options:

a) Cold, Hot & Sparkling (Full Option)

b) Cold & Hot

c) Cold & Ambient

d) Cold & Sparkling

e) Cold Only

f) Cold Sparkling & Ambient

When  reading  this  manual,  note  the 

differences  between  the  options  and 

focus  on  the  particular  sections  that 

concern the unit installed.

Содержание WL4 Firewall


























Отзывы: