WaterLogic WL4 Firewall, Техническое руководство

Страница: 10 / 25

18
Waterlogic 4 Firewall Technical Manual - Issue A, October 2010
19
INSTALLATION KIT
1-20 metres of 6mm 5/16 inch water pipe, PRV (pressure reducing valve) set at 3 bar
or 42 psi, Non return valve, Self-cutting saddle valve or isolating valves, Moulded
plug fitted, CO2Gas (if required), CO2 Regulator, Customer Handbook Allow 1 Hour
• The WL4 Firewall must be installed according to the local guidelines.
• Waterlogic strongly recommend that a pressure reducing valve is set at 3 bar
and a non-return valve be used on all WL4 Firewall installwations.
• The WL4 Firewall should not be connected to water supplies of unknown bacterial
quality or those not already fit for human consumption. The WL4 Firewall should
only be connected to a Potable drinking water supply.
• The filter on the WL4 Firewall must be changed every 6 months.
• The UV lamp on the WL4 Firewall must be changed every 6 months.
• The cold tank should also be flushed and sanitised every 6 months.
• Waterlogic International strongly recommends the use of an anti-flood device.
• Figure 1 is the recommended installation kit.
Fig 1. Waterlogic Installation Kit
Your Waterlogic 4 Firewall is generally ready for use. If the sleeping cat symbol is
illuminated , the WL4 Firewall has entered sleep mode, pushing any button will
bring the WL4 Firewall out of sleep mode. Sleep mode is an energy saving feature
that minimizes power consumption when the WL4 Firewall is not in use over extended
periods.
DISPENSING YOuR CHOICE OF WATER IS VERY SIMPLE,
AS FOLLOWS:
1 . Place your cup centrally in the dispensing area
2
. Select the type of water you wish to be dispensed and press the corresponding
button.
3. Keep the button depressed until your cup has reached the desired level, and
then release the button.
4 . Whist the dispense button is depressed, a coloured light will illuminate the
dispensing area of your WL4 Firewall.
Operating Instructions
FOLD DOWN CuP HOLDER
The fold down cup holder should be used to
reduce splashing when smaller receptacles
are in use. It is only intended for small/plastic
cups when filled which do not exceed 500
grams (16 ounces).
Please fold up when not in use.
HOT WATER CAuTION
Always place cup / mug in the centre of the drip tray. Always use
a ceramic cup or a cup suitable for use with hot water. Do not
hold cup or place hands in dispensing area whilst dispensing
water. Do not dispense water in a stop start style of vending
(hold button continuously until cup is full).
Never try to fill more than one vessel at a time.